Description: SoftCollection Impulse Counter supports up to 12 counters, counting impulses via parallel port. All you need is to connect a button via 500 Ohm resistor between Parallel Port's ground (pins 18-25) and pin, whose number appears above the counter (for example pin 2 for Boring mill). You may set a name for a desired counter. Each counter remembers it's current number and will continue from this number, after a computer has been turned on next time. The counters will be able to process 20 counts per second and will programmatically prevent contact bounce consequences. Features: * May be placed everywhere on the screen. * May be hidden or shown by single mouse click on systray icon. * May be set to be always on top of other windows. * Has an option "Run automatically when windows starts". * Automatically remembers last state. * If the counter is near the edge of the screen it gravitates to it.